Description

An advanced RO Water Purifier with KENT's patented Mineral RO™ Technology and an in-built TDS controller best suited for commercial establishments like offices, restaurants, and factories. With stainless steel construction for corrosion-free life span and in-built auto-flushing system to prevent scaling or fouling of the RO, Elite 2+ will take total care of your health and well-being. It is suitable for the purification of brackish/tap water/municipal corporation water supply.

High Purification Capacity

KENT Elite 2+ uses four RO membranes and 2 high-pressure pumps for purification that facilitates a flow rate of up to 100 L/hr.** Its slim and compact design ensures easy attachment with water coolers, making it the most sought after Water Purifier by commercial entities.

Mineral RO™ Technology

KENT's patented Mineral RO™ Technology retains essential natural minerals in purified water using the TDS Controller, thereby providing pure and tasty drinking water.

Multiple Purification Process

While the initial purification by RO membrane, having porosity as fine as 0.0001 microns, effectively removes even dissolved impurities (hard salts, heavy metals, etc.), the purification process of UV+UF ensures protection against bacteria and viruses making your drinking water pure.

Computer-Controlled Operation

KENT Elite 2+ comes with computer-controlled operations like a Filter Change Alarm that indicates filter replacement time and a UV Fail Alarm that alerts you when the UV lamp becomes inefficient, ensuring enhanced safety and convenience for you.

Specifications

Product KENT Elite 2+
Product Code 11079
Product Colour Natural
Applications Suitable for Purification of Brackish / Tap Water/Municipal Corporation water
Installation Suitable as attachment to water coolers
Body Material Stainless Steel
Mounting Floor-standing/Wall-mounting
Purification Production Rate 100 L/hr.**
Maximum Duty Cycle 500 L/Day
Filter Cartridge Sediment,Activated Carbon,UF,Post Carbon
UV Lamp Wattage 11 W
Life of UV Lamp 5000 hrs. of operation
Membrane Type Thin Film Composite RO
UF Membrane 0.1 - 0.01 Micron
Auto-Flushing System Yes
Inlet Water Pressure/Temp (Min.) 0.3 kg / cm² / 10°C
Inlet Water Pressure/Temp (Max.) 4 kg / cm² / 40°C
Min./Max. Operating pH 6.5-8.0
Booster Pump Voltage 24 V DC
Total Power Consumption 240 W
Input Power Supply Single Phase 100-250 V AC, 50-60 Hz
Dimensions (mm) 505 (L) x 360 (W) x 746 (H)
Net Weight 33.2 Kg
IP Rating IPX1

Resources

PDF User Manual Donwload PDF